• Length: 30´ (9.29m)
  • Maximum Mouth: 9.71´ (2.96m).
  • Stern angle V: 16º.
  • Approximate draft with propulsion: 23´ (0.60m)
  • Weight without engine (approximate): 3,527lbs (1,600 kg)
  • Minimum engine power: 2 x 150Hp
  • Maximum motorization: 2 x 300Hp
  • Fuel tank cap: 150 gallons (570L)
  • Water tank cap: 26 gallons (100L)
  • Passengers / day: 12 (open sea)
  • Passenger / Overnight: 4
  • Maximum height of the roof of the cabin: 6´ (1.87m)
  • Maximum bath with the right foot: 5.7´ (1,75m)
  • Lamination: vacuum infusion
  • Material: fiberglass

Series items

Lamination and Design:

Hull, deck, stringers, and laminated roofs by vacuum infusion system. Isophthalic gel, pure orthophthalic resin, Dyvinicell blankets, biaxial fabrics and foams. Submersible helmet Eco-friendly without wood. Self-expanding cover from 9 “(1.5 m3) to 12” (2 m3) of closed and injected polyurethane foam.

Cockpit:

  • Anchor magazine with cover, hinges, latches, and internal printing.
  • Four 8″ stainless steel retractable wedges.
  • Two 6″ stainless steel retractable wedges.
  • External and internal U bolt in stainless steel.
  • Stainless steel railing in the bow with fender door.
  • Bruce anchor launcher up to 22 lbs (10kg).
  • Rubber flange.
  • Take your hand in the bow solarium at BB and BE.
  • Upholstery of the bow solarium.

Cabin:

  • Floor covered with EVA carpet.
  • Access covers:
    • Internal access to the anchor store.
    • Access on sofa backs.
    • Access in the sofa seats.
    • Half boat access to freshwater tanks, batteries, and water records.
  • Kitchen furniture with BB with:
    • Sink.
    • Faucet.
    • Black top.
    • Cabinet.
    • Drawer with two drawers.
    • Glacier with 10 gallons (40L).
    • Double glass support.
  • BE cupboard with black countertop.
  • Sofa bed with backrest and upholstered upholstery with special anti-mold fabric and reversible for dining table.
  • Double bed in the middle of the boat and mattress covered with special anti-mold fabric. (Cab version)
  • Single bed in the middle of the boat and mattress covered with special anti-mold fabric. (Express version)
  • Deposit with shoemaker. (Express version)
  • 7 recessed places with switches.
  • Cab coverings with upholstery.
  • Access ladder to stainless steel deck.
  • 4 elliptical protectors with stainless steel edge.
  • Aluminum cut.
  • Cabin access door with lock and key.

Toilet:

  • Manual toilet.
  • Toilet paper holder.
  • Soap holder.
  • Take a hand.
  • Large towel rail.
  • Small towel rail.
  • Fiber cabinet with sink, tap and black lid.
  • Cabinet.
  • Trashchute
  • Door with lock.
  • Shower cabin.
  • Recessed place.

Social square and fishing:

  • Console:
    • Glove box with cover, shock absorber and closure.
    • Fire extinguisher
    • Finca Pé.
  • Tempered glass windshield with aluminum frame.
  • BB glove compartment with lid, hinges and closure.
  • Folding double pilot seat. (BE)
  • Individual folding pilot seat. (BB)
  • Double furniture with trash can, glacier and circular floating door. (BE)
  • Simple furniture with nursery / glacier and closet. (BB)
  • Three double roller coasters (BB&BE).
  • Freshwater shower (BE).
  • Compartment for two battery switches (BE).
  • Two flush-mounted stainless steel doors (BB&BE).
  • Two locking feet for side access (BB&BE).
  • Two compartments (BB / BE), with bulkhead for storage.
  • A 5” floor registration cover to access the internal nozzle of the gas tank.
  • Floor cover to access the gas tank compartment.
  • Two compartments for the floor cover (BB and BE) with 47 gallons (180L) each.
  • Stern retractable seat with stainless steel backrest and support for six bars.
  • Stern access door.
  • Retractable ladder in stainless steel with three steps on the stern platform with handle.
  • Plastic porthole to access the basement.
  • Two compartments with cover on the aft shelf.
  • Upholstery set.

Electrical and lighting:

  • BB / BE navigation light in bow or rigid roof.
  • Reached severe or hard light superior.
  • Tinned 1.5mm, 2.5mm, 4mm, 6mm electrical wires.

Hydraulics and fuel:

  • Freshwater system with pressurized pump and 26 gallon tank (100L)
  • Fuel system with 150 gallon (570L) gas tank, ventilation, internal and external filling nozzle, stainless steel hoses and clamps.
  • Floor compartment drainage system with: sewage box, 500 gph bilge pump, automatic, hoses, stainless clamps and stainless steel outlet.
  • Deck drainage system with 1-1⁄2 ‘sump drains, stainless steel hoses, 1-1⁄2’ clamps and outlets.
  • Water outlets: 1-1⁄2 “, 1” and 3⁄4 “.

Optional

  • Comfort kit 1: 12V refrigerator, 14 gallons (53L), stainless steel, stainless steel bezel, tinned wires and MOB.
  • Comfort kit 2: Microwave, 4.7 gallons (18L), with stainless steel frame, tinned wires and MOB.
  • Comfort kit 3: 330 amp stationary battery air conditioning system.
  • Comfort kit 4: 1750wts inverter and charger, 120v electrical panel with circuit breakers, two cab plugs and Shore Power in the fishing plaza. (Boat plug only)
  • Hard-Top: Fiber outer and inner cover, stainless steel frame with 2″ tube, 6 stainless steel rod brackets, 2 led lights.
  • Electric toilet kit: toilet with ceramic vase, stainless wolf log, stainless steel sink, stainless steel outlet, hoses, tinned wires and MOB. (Exchange Base)
  • Saltwater kit: 2.9GPM pressurized pump, stainless wolf log, stainless water collector, shower box, hoses, flanges, tinned wires and MOB.
  • Nursery kit: 500 GPM pump, stainless wolf log, stainless steel water collector, plastic screen thief, adjustable aerator, hoses, clamps, tinned wires and MOB.
  • Anchor winch kit: composed of electric winch, stainless steel chest, foot buttons, control panel, 60 amp Blue Sea thermal fuse, stainless anchor launcher, tinned wire and MOB.
  • Courtesy light kit: 2 courtesy lights, tinned wires and MOB.
  • Fin kit: pistons, stainless steel fins, control knobs, harness and MOB.
  • Stern table: based on fiber, pedestal and support and screws in stainless steel and MOB.
  • Bait carrier drawer: composed of 3 flat drawers, stainless screws and MOB.
  • Electric reel kit: 2 points (1xBB and 1xBE), 25 amp Blue Sea thermal fuse, tinned wires, crocodile clamp and MOB bronze bar mounts.
  • Double retractable bench: composed of stainless steel rim, upholstery and backrest.
  • Individual retractable bench: composed of stainless steel rim, upholstery and backrest.
  • Color housing: painted with PU or gel according to the chosen color.
  • Semitrailer: Made of wood, consisting of 1 axle, four tires, front wheel and ball type.
  • Beach cart: Made of wood, consisting of 2 fixed 8 “wheels and 2 8” rotating wheels.
  • External bonnet: 3 arches, classic line, plastic connectors, and aluminum tube.
  • Acrylic cover box: H / Top, for 2 outboard motors.
  • Capaleve Cover Case: w / H-Top, for 2 outboard motors.

Basic Assembly:

  • Steering wheel in stainless steel.
  • A hood, hoses, and finishing nets.
  • A 1500GPH automatic bilge pump with stainless steel outlet, hose, and clamps.
  • Tinned electrical harness with 1.5 mm, 2.5 mm, 10 mm and 35 mm electrical cables.
  • 2 keys of 2 batteries.
  • Two 95 amp batteries. (Engines)
  • A 95 amp battery. (Service)
  • Battery terminals and electrical terminals.
  • A cigarette lighter socket.
  • A compass.
  • A 12 vdc circuit breaker panel.
  • 2 switch panels.
  • Power steering assembly, consisting of steering box, piston and hoses.
  • Engine mounting
  • Assembly labor.

Link: Brochure

COLORS

LAYOUT

 VIDEOS

* The images are shown for illustrative purposes only and may include accessories that are not supplied as standard.